COPYRIGHT © 2024 PYRO-TECH SECURITY SUPPLIERS | ALL RIGHTS RESERVED
Waterproof, pet immune, outdoor/indoor, dual technology intruder detector that combines 2 independent PIR detection zones for increased reliability, plus microwave sensor. Includes Anti-masking and shock & vibration sensors.
Detection reliability
OUT-SMART is an Outdoor/Indoor dual technology intrusion detector, which maximizes movement detection reliability by combining two independent PIR detection zones and a microwave sensor.
The Upper PIR detection zone is parallel to the ground while the Lower PIR detection zone is diagonal.
Both Upper and Lower PIR detection zone sensitivity levels can be adjusted separately. OUT-SMART will alert only if both PIR detection zones and the supportive microwave radiation are crossed at the same time.
Installation height flexibility
The installation height is not limited to a short elevation but from 1 ~2 meters.
Pet immune
As seen in the drawing above, OUT-SMART will generate an alarm only when both PIR detection zones and the supporting microwave sensor provide simultaneous detection.
When a pet crosses only one of the two PIR detection zones, there will be no alarm.
Anti-masking
In addition to an unprecedented amazing and reliable detection capability, OUT-SMART is equipped with excellent protection against any attempt to disable its operation by blocking (masking) its near field-of-view, whether the alarm system is Armed or Disarmed (Anti-masking protection).
The protection against masking the near field-of-view of the detector is achieved by a continuous active infrared beam scan.
Selectable horizontal detection angle 1200, 1050, 900
The horizontal detection coverage angle can be reduced and limited from 1200, 1050, 900 by placing 2 or 4 provided blockers respectively, as shown in the picture below.
Bracket-free mounting, Multi-directional
Aiming is done within the detector.
The internal unit rotates horizontally 180 degrees, as shown in the motion picture below.
Waterproof and all weather resistance
Thanks to its state-of-the-art design, OUT-SMART is waterproof and all weather resistance.
All detectors’ features can be adjusted by a Remote Control (Obtained separately).
Detector’s features can be remotely programmed and adjusted by our unique and friendly Remote Control so no longer need to climb a ladder, disassemble the detectors and make manual adjustments whenever needed.
Moreover, technical functionality data and detection evens history of the detector can be displayed on the Remote Control screen.
The Remote Control can be purchased separately.
Partial list of possible programming and options by using Remote Control RM-1:
| Power Supply | 11 to 14V DC |
|---|---|
| Current Drain | Standby: 35mA (Max), Operation: 70 mA (Max) |
| Alarm Contacts Endurance | (N.C.) 15V DC / 20 mA. |
| Masking Contacts Endurance | (N.C.) 15V DC / 20 mA. |
| Tamper Switch Contacts | (N.C.) 15V DC / 20 mA. |
| Warm-Up Time | 1 Minute |
| Detection Speed | 0.1 ~ 5 m/sec |
| Alarm Time | 2 Seconds (Programmable from 1 to 99 Seconds by the optional Remote Control) |
| Response Time To Masking | 90 Seconds (Max.) |
| Anti-Masking Relay Activation Time | As long as Masking persists (at least 2 seconds) |
| Motion Detection Coverage | Selectable 900, 1050 or 1200,12 meter |
| Operating Temperature | -37°C ~ 70°C (-4°F ~ 158°F) |