The 3 I/O PLUS Modules are fully monitored loop powered devices which permit the interfacing of third-party equipment with the fire alarm control panel using normally open dry contact connections. Each module can be fitted with a maximum of three inputs and three outputs.
The connection to each input is monitored for fault (open or short circuit) and alarm conditions.
The interface is used to monitor the contacts of an external system which must be interfaced to the fire alarm system, for example a flow switch in a sprinkler system to indicate if the sprinklers have been activated or extinguishant level monitoring in gas extinguishing systems, etc.
230 +10% -15% V AC – Monitored
1.7 A OR 2.4 A @ 28V DC nominal
|Battery Charger - Current O/P||
1 A max.
|Battery Type / Fuse||
Max. 2 x 12 V 7 AH – Lead Acid VRLA / 3 A
|I/O Unit - Loop Current||
1.7 mA Quiescent – 2.4 mA Fault
Changeover – 30V DC 1 A Resistive
|I/O Controlled Relay||
Changeover – 240 V AC 10 A Resistive
-10ºC to +50ºC
|Humidity / Protection||
Max. 95% no condensation / IP21
273 (L) x 107 (W) x 404 (H) mm
1.7 Kg – 7 Kg inc. 2 x 7 AH Bat.