BM 60 M

BM 60 M Concept

BM is composed of 2 units – 1 transmitter (TX) and 1 receiver (RX) – installed at a maximum distance of 60, 120 or 200 meters. The transmitter emits continuously the microwave in direction of the receiver. The intruder who passes through the 2 units reduces consecutively the received signal, up to reach the alarm level and generate the alarm. The perimeter protection is achieved by installing multiple barriers in single thread.

Add to quote

Product Features

The security area is genuinely as wide as it is high (up to 4 x 3 meters) that it is impossible to cross without generating an alarm and provides a higher security compared to other technologies.

Setting a pet immunity is easy: the alarm level is programmed to ignore small animals and generates less unwanted alarms.

The security may be increased automatically thanks to its built-in integration circuit which amplifies the possible conditions for an alarm and triggers more easily.

BM distinguishes a real alarm from a disqualification situation (like a van parked between the barriers).

With the poles, BM are only 120 cm high; it is easy and quick to install them, so the cost of installation is lower compared to other technologies. It is also simple to set perfectly thanks to few trimmers and dip-switches. Finally, thanks to its regular NC outputs, BM works with all alarm and CCTV systems.

Since 2003, BM integrates Planar antennas which reduces the sensibility are with 20% compared to former parabolic antennas. Longer distances BM can be installed for the same perimeters and costs are saved. In addition, to be protected from rain, the parabolic antennas use big expansive difficult-to-handle waterproof housings when the BM’s planar antennas are highly protected by tropicalisation and installed in high resistant protective cover that avoid the condensation and its consecutive rust development.

BM operates in all weather conditions (snow, rain, fog) without distance reduction, unlike the active infrared barriers. If the temperature reaches less than -5°C, it is possible to place a TERM1 heating kit. BM temperature range is -20°C – 55°C.

BM M and BM HP are 13.8 Vdc powered. VAC series is directly fed by the main (220 Vac) and include an optional backup battery to compensate and electricity absence. Main power feeding simplifies the wiring and decrease the installation cost.

The BM range is perfect for all the perimeters: gardens, houses, borders, warehouses, airports, commercial resorts, car and truck parks, civilian, industrial, military, nuclear and electrical plants.

Digital BM HP Advantages

The environmental variations may improve or deteriorate the microwaves level reception over time. An Automatic Gain Control circuit automatically optimises the level to maintain it flat; the settings are easier and the security is higher.

BM HP may reduce digitally by up to 30% the area of sensibility and then ignore the movements in the peripheral objects (i.e. from fences or trees) which are the origin of unwanted alarms.

BM HP barriers automatically record up to 3600 events if it is possible to classify between good and false alarms. BM HP then verifies the new events according to this database and stops the unwanted alarms.

Additionally to the NC outputs and other regular settings, BM HP present a USB and an RS485 port to be coupled to an RS485 hub or an AVS ELECTRONICS’ control panel.

Thanks to the local USB port or remotely by PSTN, GSM or IP, HPWIN software shows all the parameters, an oscilloscope, the 3600 last alarm events (with date and time) and purposes all the tools to set the barriers.

Product Specifications

Additional information

Maximum Range

60 meters

Nominal Tension

12 V

Minimum Tension

11.5 V

Maximum Tension

15 V

Standby Consumption

Tx = 31 mA
Rx = 70mA

Consumption During Alarm

Tx = 31 mA
Rx = 70 mA

Size (D x L x H)

150 x 105 x 195

Block Input

Thought dedicated "B" input

Alarm Output

Normally closed exchange with 500 mA range at 12V

Tamper Output

Normally closed output

Optional Anti-Removal Kit


Disqualification Output

Normally closed output for information of disqualification

Test Point Output

For control of the signal received

Microwave Working Frequency

10.525 GHz (+/-20 MHZ)


In 5 different cannels to select via dip-switch

Irradiated RF Power

25 dBm peak

Working Temperature

From – 20°C to + 55°C
For the installation outdoor the use of the optional heating kit is suggested (Term2)

IP Degree


Equipped With

Bracket for fixation on 40 mm pole

Download Centre

Add to quote