COPYRIGHT © 2024 PYRO-TECH SECURITY SUPPLIERS | ALL RIGHTS RESERVED
Works with the RX-20 receiver model.
VIP Pro wireless detector provides highly reliable movement detection and ensures excellent protection against any attempt to disable its operation by blocking (masking) its near field-of-view or when the detector has been covered, whether the alarm system is armed or disarmed (Anti-Masking).
Highly reliable movement detection is achieved by combining two PIR synchronised sensors, which allow three-dimensional thermal imaging of the protected area. The analogue signal received from each sensor is converted to digital signals and separately processed by a powerful Microprocessor.
Movement alarm will be generated only if each of the sensors received a true detection signal. Each sensor’s sensitivity can be adjusted separately by a trimmer.
Shutters Behind The Lens
Enable narrowing the vertical detector’s PIR field-of-view.
Behind the detector’s lens, there is a support that consists of shutters placed above both PIR sensors. By opening or closing the shutters you can limit the vertical angle of the PIR field-of-view.
Tilt Plates
Enable mount the detector on an angle.
To mount (install) the detector directly on a wall or any other flat surface and provide the detector with a slight vertical tilt (upward or downward) without using a mounting bracket, use one or two of the provided tilt plates, which will allow you to tilt the detector upward or downward and thus its field-of-view accordingly.
Use more than one tilt plate to achieve a greater vertical incline of the detector and thus its field-of-view accordingly.
Each tilt plate tilts the detector’s vertical field-of-view by 5°. So if you mount the detector with two tilt plates, the detector’s field-of-view will be tilted by 10°.
If you mount the detector with three tilt plates, the detector’s field of view will be tilted by 15°.
| Battery | 3.6V, 1/2AA Lithium Battery |
|---|---|
| Current | Standby = 10μA, Max. |
| Detection Range | Indoors = 12 meter |